Double feed plate

I ordered it two days ago with some modification:
1) Upper plate cover as much as possible the entire palate
2) Upper plate a little thicker
3) Multicolor uper and lower plate
4) Upper plate with side elements in the lower part as highlited in photo

http://i68.tinypic.com/n556yh.jpg
 
Hi,

I am interresed to, to this appliance.
how is the feeling
you can speak with ?
how lo,g you can have it in your mouth ?

Thanks
 
if you read above, I have requested changes:
1) to make talking more difficult.
2) to prevent the tongue from moving easily.
3) to make the appliance much more uncomfortable and much more cumbersome.
4) to get more saliva.
 
This is the double feed appliance.

http://anonym.to/?https://postimg.cc/gallery/i1vkk5k2/

The appliance is thick.
A lot of saliva is created.
It is very difficult to talk and it is inconvenient to keep many hours in your mouth.
The two vertical projections prevent the movement of the tongue.
I didn't understand what the two vertical protrusions are for, but they should guide the jaw for correct positioning
 
That looks great, i was thinking of buying double feed plates, would you recommend the thicker plastic or is it too much in your mouth?
 
the two protrusions in combination with the lower dental appliance actually work.
They serve to move the lower jaw to the front.
This device is used when the patient has problems with malocclusion.
I have used braces for 11 years in the past. I don't need it anymore obviously.

I wanted to try this type of orthodontic appliance to understand what feeling you get when wearing it.
I requested some changes to make it even more torture to carry in the mouth.

The upper orthodontic appliance is very thick and covers the entire palate.
The upper orthodontic appliance has tubes where I insert the mustache with the headgear.
The upper orthodontic appliance also has a bite on the incisors.
The lower braces is very thick.
The lower orthodontic appliance also has the bite that mates with the upper orthodontic appliance

The changes I made make it even more difficult to speak and cause a lot of saliva in the mouth.

The device can be worn for a few hours, then it becomes torture.
 
The orthodontic appliance is very thick and occupies the entire palate.
This thing causes a lot of saliva and creates heat in the mouth and alters the taste in the mouth a little.
The two metal fins with the closed mouth are felt under the tongue and it is felt that they touch the area near the frenum nerve. This thing makes you feel annoyed.
The metal fins prevent the movement of the tongue and touch the lower appliance when i close my mouth.
The metal fins are inclined with respect to the lower device to make sure that the mouth closes in a specific position.
The upper and lower braces also having the bite reach up to the tip of the teeth and you feel a bit of pain because the bite presses behind the incisors.
When you close your mouth you feel that the two appliances touch on the front side due to the thick bite.
The lower braces often put pressure behind the teeth and in the lower part of the mouth and after a while they start to feel uncomfortable.
The upper appliance being thick and having the bite makes the tongue lower in position.
I also inserted the mustache into the tubes and attached the highpull headgear together with the cervical headgear keeping them in traction as much as possible.
You feel the pull on the jaw.
With the mustache attached it is very difficult to drink from the glass, you creampie everything.
I tried to eat with the braces in my mouth along with the mustache.
Pasta can be eaten more or less.
Eating with braces is however difficult because the bite reaches the tip of the teeth and you cannot bite well.

In general, this device with the modifications made to make it thicken makes your mouth feel even more blocked and it is very annoying to wear together with the mustache if inserted and the two non-removable metal fins

When you try to speak, it is difficult to make a speech. The tongue has little movement.
It is difficult to pronounce letters such as T, S, R and others.
It is difficult for those in front of you to understand what you are saying even if you speak softly
 
My question is: Are the braces from the shop working and moving the lower jaw to front or is it like 0-level?
 
The orthodontic appliances purchased on Bracesshop are real appliances.
This orthodontic appliance moving the lower jaw to front

The Sander  Bite Jumping Appliance (This is the real correct name , NOT Double feed plate) can effectively correct class II malocclusions by a combination of dentoalveolar and skeletal effects.

The Sander Bite Jumping Appliance is a functional orthodontic device, consisting of two resin plates. The upper plate has a median expansion screw and two sturdy steel extensions (clamps) that form a 60 ° angle with the occlusal plane.
The lower plate instead has an inclined plane parallel to the clamps. Both plates are anchored to the sixths by two Adams hooks and anteriorly have a vestibular arch that reaches the canines. The lower plate also has an incisal resin covering which has the purpose of reducing the vestibularization of the lower frontal group.
 
You must log in or register to reply here.
Back
Top