BracesForum.net

English => General => Topic started by: dominek000 on 10. February 2021, 01:43:26 AM

Title: Is there anyone who is creating braces?
Post by: dominek000 on 10. February 2021, 01:43:26 AM
Hello. I'm 20 years old boy from Poland. I would like to get braces but it's too expensive in my country. I'm looking for someone who creating braces and would like to create one for me. Of course I can pay, but not that much...  I'm thinking about orthopedics and orthodontics braces :)
Title: Re: Is there anyone who is creating braces?
Post by: JB_Brace_Lover on 10. February 2021, 13:00:27 PM
bracesshop does orthodontic braces.
Not sure who can do Orthopaedic braces without a doctor referral.
Title: Re: Is there anyone who is creating braces?
Post by: fordje on 10. February 2021, 18:56:47 PM
Orthopaedic braces is indeed more difficult.
But you can check vintage braces UK they are active on social media and they have a website.
Title: Re: Is there anyone who is creating braces?
Post by: claude on 10. February 2021, 19:22:59 PM
You have to go regularly to sites like ebay ... there are often advertisements for this kind of product, I was able to get an orthopedic corset that suits me perfectly for 70 euros.
Title: Re: Is there anyone who is creating braces?
Post by: PlainJane on 10. February 2021, 20:16:27 PM
I have a dental vacuum former from Ebay and have been experimenting. I can do Essix retainers and also very realistic metal braces by gluing the brackets onto the plaster model and vacuum forming over them, the glue snaps off the plaster model and leaves the brackets and wires embedded in the plastic. But I don't do them commercially, just for myself.
Would be interested if anyone has tried successfully gluing brackets to smooth plastic, there is a product called Aligner Bond but it is ££££.
Super glue does not do much, nor does orthodontic adhesive or dental bonding material.
I wondered about the stuff that you use to glue car rear view mirrors to windscreens?
Title: Re: Is there anyone who is creating braces?
Post by: retained on 11. February 2021, 00:59:30 AM
Yes, orthopaedic braces (back, neck, leg) made to measure for 'enthusiasts' ....vintagebraces.co.uk.
Very good.

Title: Re: Is there anyone who is creating braces?
Post by: MikeB on 11. February 2021, 15:56:33 PM
Would be interested if anyone has tried successfully gluing brackets to smooth plastic

I'm going to be experimenting with Bondic today or tomorrow for exactly this purpose. It's inexpensive and non-toxic, supposedly invented by a German dentist. I'll be (re)attaching metal brackets to an acrylic tray today or tomorrow. I'll let you know how it goes.
Title: Re: Is there anyone who is creating braces?
Post by: PlainJane on 12. February 2021, 01:04:58 AM
Cool! Thanks Mike!
Title: Re: Is there anyone who is creating braces?
Post by: zahnspange on 12. February 2021, 12:21:29 PM
I can do any kind of orthodontic braces ...
- fixed metal, ceramic, lingual
- removables, activator, bionator, Hawleys
- foil Appliances, Essix ...
feel free to requests me
Title: Re: Is there anyone who is creating braces?
Post by: PlainJane on 12. February 2021, 22:51:45 PM
I have been experimenting using a little engraver tool I use for jewellery making.
If I glue brackets onto all the teeth of the model, them thermoform 1mm plastic over the top I can use the little rotary engraver to cut away the plastic around and over the brackets. This leaves them exposed as they would be during treatment. I can then put on wires and ligs (blue today!) and they are just like real braces - the bracket bases are held by the plastic but the rest of the brackets and wires are like real braces.
I can even use the elastic hooks for elastics - I put brackets with hooks on most of the teeth so I can try different elastic configurations. Very cheap to do, I think my vacuum former was £100, and after that the supplies are really cheap - £5 for a set of brackets, stick of ligs, and an archwire for example. All from Ebay.
The appliance it makes is like a nice mix of removable and fixed braces, I make it to cover my whole palate like a hawley. I am going to see if I can find a cheap Herbst to put on, I used to see used ones on German Ebay but not now, maybe they are against the rules.
Title: Re: Is there anyone who is creating braces?
Post by: PlainJane on 12. February 2021, 22:57:47 PM
I have just changed my mind. ;D
Now after watching this video I want a Sabbagh Universal Spring! https://dereferer.me/?https://www.youtube.com/watch?v=RQ88q80jxcw
Title: Re: Is there anyone who is creating braces?
Post by: MikeB on 20. February 2021, 22:40:41 PM
I'm pleased to report that the Bondic worked like a charm! VERY good bond between the acrylic and the brackets. Recommended.
Title: Re: Is there anyone who is creating braces?
Post by: PlainJane on 22. February 2021, 12:16:19 PM
Thanks Mike - will have to give that a try. :)
Title: Re: Is there anyone who is creating braces?
Post by: firehazard9 on 28. June 2021, 09:08:12 AM
I believe bondic was originally designed as dental adhesive. At least that's what I read on the box mine came in.
Title: Re: Is there anyone who is creating braces?
Post by: 8749 on 14. August 2023, 01:33:15 AM
I have a dental vacuum former from Ebay and have been experimenting. I can do Essix retainers and also very realistic metal braces by gluing the brackets onto the plaster model and vacuum forming over them, the glue snaps off the plaster model and leaves the brackets and wires embedded in the plastic. But I don't do them commercially, just for myself.
Would be interested if anyone has tried successfully gluing brackets to smooth plastic, there is a product called Aligner Bond but it is ££££.
Super glue does not do much, nor does orthodontic adhesive or dental bonding material.
I wondered about the stuff that you use to glue car rear view mirrors to windscreens?

I've always done it with a soldering iron before. Place the bracket on the rail and heat it until it sinks in. It holds super tight and looks just like it's glued.
Title: Re: Is there anyone who is creating braces?
Post by: dominek000 on 24. August 2023, 00:26:54 AM
Well.... I'm still looking for someone...